Sprinkler system inspection is often separate from a full home inspection
A lot of folks we talk to figure the home inspection covers anything with a pipe or a wire in it. That's a fair guess, but it isn't always how it works. A standard home inspection focuses on the house: the roof, structure, electrical, plumbing, heating and cooling, and so on. The sprinkler system out in the yard is often treated as an extra item. If nobody asks for it, it can slip through without anyone turning it on.
There's a practical reason for that. A sprinkler system isn't one thing in one spot. It's a controller on the wall, valves in a box somewhere in the yard, a lot of buried pipe, and heads spread out across the lawn and beds. To really see how it works, you have to run each zone, walk the yard while it runs, and watch what the water does. That takes time, and it's a different kind of looking than walking through an attic.
When the sprinkler system is checked on its own, these are the kinds of things worth looking at:
- Whether the controller powers on and each zone starts and shuts off
- Heads that are broken, stuck down, tilted, or spraying the house, the fence, or the street
- Soggy spots, bubbling, or low pressure that can point to a leak in buried pipe
- Dry patches where a zone isn't reaching the grass it's supposed to water
- The visible condition of the valves and the backflow device that keeps yard water out of your drinking water
Here's how it tends to show up when it gets skipped. You close on the house, move in, and set the timer for the first time. A week later you notice one corner of the yard stays muddy and another strip of grass is turning brown. Then the water bill comes. None of that would have been hard to spot if someone had run the zones before you signed. By then it's your repair, not a question for the seller.
So our advice is simple. When you schedule any inspection, ask plainly: is the sprinkler system included, or do I need to add it? Don't assume a yes. The same goes for other systems that sit outside the main house, like a pool and spa, a private well, or a septic system. Those are separate inspections too, and each one has its own page here if you want the details.
Morgan Inspection Services offers sprinkler system inspection along with pre-purchase home inspections, so you can cover the house and the yard while you're still in your option period. We'd much rather you ask the question up front and know what you're getting than find out about a broken zone after the keys are in your hand.
Buying, selling, or hitting the 11th-month warranty window are the main reasons to book
There are three times when we'd tell you a sprinkler system inspection is worth the money: you're buying a house, you're getting ready to sell one, or you own a newer house and your builder's warranty is about to run out. All three have the same idea behind them. You want to find the problem while someone else is still on the hook for it.
If you're buying, the clock is the big thing. Once your option period ends, a broken zone or a leak under the lawn is yours to fix. Most buyers already plan on a home inspection in Brownwood before they close. Adding the sprinkler system to that visit lets you check the house and the yard in one trip, while you can still ask the seller to repair something or work out a fair price.
If you're selling, the reason flips around. You'd rather find out about a stuck valve or a head spraying the side of the house now than read about it in the buyer's report. A pre-listing inspection that includes the sprinkler system gives you time to get repairs done on your own schedule with a contractor you pick. Otherwise you may be rushing them in the middle of a deal. It also means fewer surprises when the buyer's inspector turns the zones on.
The third reason is the one people forget. When a builder puts in a new house, the sprinkler system usually goes in near the end, along with the sod and the beds. Over that first year, things can shift. Soil settles around buried pipe. Heads end up too low in the new grass, or they get knocked crooked by a mower. Nobody notices because the yard still looks green from the street. An 11th-month warranty inspection is meant to catch issues like these while there's still time to report them to your builder under your warranty.
Here's a good way to tell if any of this fits you:
- You're under contract on a house with a sprinkler system and your option period hasn't ended yet
- You're about to list your house and haven't run every zone yourself in a while
- Your house is close to a year old and you're not sure how to read your builder's warranty paperwork
- You own a rental property and haven't had anyone check the system between tenants
If none of those describe you, and your system is running fine with a normal water bill, you probably don't need to book anything right now. Just walk the yard once in a while when the zones are on and watch for soggy spots or dry ones.
If one of those does describe you, we'd be glad to help. Mike Morgan holds TREC license #6231 and has been inspecting homes around Brownwood since 2002. Your inspector will run each zone with you, show you what they see, and explain how the system works. That way you're not guessing when you set the timer later.
What gets checked during a zone-by-zone run
Running a sprinkler system one zone at a time is a lot like checking the lights in a house one switch at a time. You flip one, see what comes on, and look for anything that doesn't act right. Here's what that looks like out in the yard, and what each clue tends to mean.
It starts at the controller. Each zone is turned on by hand instead of waiting for the timer. That shows right away whether the wiring and the valve for that zone respond. If a zone won't start, the cause could be the controller, a cut wire under the yard, or the valve itself. A run tells you which zone is dead. It doesn't always tell you why, but it narrows things down a lot.
Next comes the valve. When a zone starts, the heads should pop up within a few seconds. When it shuts off, the water should stop. If a head or two at the low end of the yard keeps trickling for a minute, that's often just water draining out of the pipe downhill. If water keeps coming the whole time the next zone is running, the valve may not be closing all the way. That kind of leak is easy to miss, and it wastes water every single day.
Then the real looking happens: walking each zone while it runs and watching what the water does. A few clues tell you a lot.
- A fine mist or fog around spray heads usually means the pressure is higher than the heads were made for. A lot of that water blows away before it ever lands.
- Short, weak streams that don't reach the next head can point to low pressure, a valve that's partly closed, a clogged nozzle, or a leak somewhere upstream.
- A gusher or a puddle that keeps growing usually means a broken head or a cracked fitting.
- Heads that pop up but sit below the grass spray into the turf instead of over it.
- Spray heads and rotor heads mixed on the same zone put out water at very different rates, so one part of the zone gets soaked while another stays thirsty.
Coverage matters too. In a well-laid-out system, water from each head reaches close to the next head. Gaps show up later as brown stripes or circles. They're easy to see while the zone is running and hard to spot by just looking at the lawn on a cool, green week.
The backflow device gets a look for its visible condition, things like cracks, drips, missing parts, or damage from a hard freeze. A formal test with gauges is a separate job done by a specialized tester. If the device looks questionable, that's the next step.
We'll be straight about the limits. Nobody can see buried pipe without digging it up. What a zone-by-zone run does is find the signs, like a soft, wet low spot or pressure that drops off at the end of a line, and point a repair person to where the trouble probably is. It can't promise there's nothing hidden underground.
When it's done, you should know which zones work, which ones don't, and what each problem likely means. That's enough to get a fair repair quote or have a clear conversation with a seller or builder, instead of guessing.
Thinking about a sprinkler system inspection in Brownwood? Let's talk.
Call (325) 510-3305 · report within 24 hours
Running water through a zone doesn't mean the system is fine
Here's a moment we think a lot of buyers have had. You're walking through a house, and the seller says, "Sprinklers work great, watch." They flip a zone on at the box, the heads pop up, water sprays, and everybody nods. Thirty seconds later it's off and you're back inside talking about the kitchen.
That test tells you one thing. Water can get to that zone. It doesn't tell you whether the system is watering the yard the way it should, or what it's doing to the house and your water bill the other six days of the week. A system can turn on every morning and still be doing a poor job.
Some of the most useful things to know don't show up in a short burst. They show up after a few minutes of running, or when you look at how the system is set up:
- Runoff. A zone can look fine at first. After five or ten minutes the water may start sheeting off the lawn onto the sidewalk or into the street. That usually means the run time is longer than the soil can soak up in one go.
- Water hitting the house. A head aimed a little off can wet the siding, the windows, or the ground right against the slab every time it runs. Keeping the soil around a foundation steadily soaked isn't something you want, and it's easy to miss when you're standing in the middle of the yard.
- Watering pavement. Heads along a driveway or curb that throw half their water onto concrete are paying to water something that doesn't grow.
- How the controller is programmed. Every zone set to the same run time, the schedule left on summer settings all year, or start times in the heat of the afternoon. None of that is broken, but it changes how much water reaches the roots.
- Rain or freeze sensors. Some systems have one, some don't, and some have one that's been unplugged or painted over. It's worth knowing which you've got.
- The valve box. Valves sitting in a box full of mud and water, or a lid buried under grass so nobody can find it, will make the next repair harder than it needs to be.
None of these will stop a zone from coming on. That's exactly why a quick on and off test can make a system look healthier than it is. The water shows up, so it seems like everything's working.
We like to think of it the way we'd think about a car. Starting the engine in the driveway is a good sign. It doesn't tell you how it shifts, how it brakes, or whether it's leaking oil onto the garage floor. You find that out by driving it for a while and paying attention.
The same goes for the yard. To know if a sprinkler system works right, someone has to let each zone run long enough to see where the water really goes, then look at how the controller is set to run it. Then you've got something real to work with. Maybe that's a request to the seller. Maybe it's a note to adjust a few heads and change the schedule. Or maybe it's just peace of mind that the system you're buying does what it's supposed to.
If someone's already shown you the sprinklers coming on, that's a fine start. Just don't let it be the whole answer.
When a homeowner can skip the professional inspection
We'll give you the honest answer here, because not everybody needs to pay someone to look at their sprinklers. An inspection earns its keep when there's a deadline and someone else is still responsible for the repair. If there's no deadline and nobody else to hand the problem to, you can often do a good share of the looking yourself.
Here are the cases where we'd tell a neighbor to save the money:
- You've lived in the house a while, you aren't buying or selling, and your builder's warranty ran out long ago. Nobody else is going to pay for a fix, so a report doesn't give you anything to bargain with.
- You already know what's wrong. If a head is snapped off from the mower or one zone has quit, an inspection would just tell you what you already see. Call someone who does sprinkler repair and have them fix it.
- Your water bill looks normal compared to the same month last year, the grass is growing evenly, and you don't see soggy spots or dry patches.
- The only thing you need is the backflow test. That's the separate gauge test mentioned earlier, and it's done by a specialized tester, not during an inspection.
If you're in one of those spots, here's a simple check you can do yourself a couple of times a year. Pick a cool morning when you've got half an hour. Go to the controller and start each zone by hand, one at a time. Then walk out and stand in that part of the yard while it runs. You don't need tools or any training. You just need to pay attention.
- Does every head pop up, or does one stay down in the grass?
- Is any head spraying the house, the fence, the driveway, or the street?
- Is there a spot that's wetter than the rest, or one that never gets wet at all?
- When you shut the zone off, does the water stop?
Write down anything odd with the zone number next to it. That short list is worth having, even if you never call anybody. It's also exactly what a repair person will ask you for when you do call.
It's a good idea to look at the controller while you're there, too. Check that the clock shows the right time, and see whether the schedule still makes sense for the season you're in. A lot of systems run on whatever someone set years ago and haven't been touched since.
There's one more case where you can skip it: the house doesn't have a sprinkler system, or it has one the sellers say hasn't been used in years and you plan to tear it out. If you aren't going to use it, there's no reason to pay to find out how well it works. We'd still have someone confirm the water to it is shut off, so an old line isn't leaking under the yard without anyone knowing.
None of this replaces a real look when money is on the line. But if your system's running fine and nothing is riding on it, a walk around the yard with a cup of coffee will tell you most of what you need to know.
